Cage Systems
Residence Breeder Cage Model
Each unit is 4592 mm long and is supported by 'U profile' legs every 1148 mm. With its robust construction, it can be installed modularly from 2 to 5 tiers without a platform and without any additional auxiliary products.
Cage Unit: Each unit is 4592 mm long and is supported by 'U profile' legs every 1148 mm. With its robust construction, it can be installed modularly from 2 to 5 tiers without a platform and without any additional auxiliary products. The system operates without problems over lengths of up to 150 m. Thanks to the plastic slat floor, females and males can walk without injury, move around very comfortably within the compartment (1,20 m x 4592 mm), and easily reach water and feed from the nest.
Feeding System: In the breeder cages, a purpose-designed feeding system running through the middle of the cage compartment is used, keeping feed utilisation and controlled feeding at the highest level. Inside the cage compartment there is 15 cm of feeder length per female. There is one feeder opening for each rooster, and the feeding of the roosters is controlled in this way.
Cage Compartments: The bottom mesh wires provide the highest egg quality and maximum comfort for the hens. The cage compartment doors are designed with a horizontally operating system that can be opened and closed easily with one hand. This makes it easier to place breeder birds into the cage and take them out. Thanks to the automatic nest on one side of the cage, egg yield is very high and the rate of broken and dirty eggs is very low. Lighting is provided by protected lamps located in the middle of each compartment.
Drinking System: The drinking system is located on the nest side and its height can be adjusted along the line with a hand winch; special steel nipples for breeders are used. Every hen and rooster can reach water easily. The cups beneath each nipple prevent water from being splashed and wetting the manure excessively.
Egg Collection System: With the lift-type egg collection system, eggs are collected safely, keeping the rate of breakage and cracking to a minimum. Eggs carried out of the cage on Polypropylene (PP) belts are transported to the egg room by a plastic belt conveyor.
Manure Removal System: The drive and pressure drums in the manure removal system are manufactured with a rubber coating. This increases drum durability and efficiency. The new-generation adjustable feed setting devices located under the feed hoppers ensure that feeding is carried out only in the quantity required.
Gallery
Quote request
Your request goes straight to your regional contact
Send us your capacity, bird type and house dimensions; our engineering team will come back with a layout and an equipment list.
- Average response time: 1 business day
- Phone+90 (232) 876 10 40